STAR PLAST SA-200
Water-Reducer Admixture
OUR PRODUCT
STAR PLAST SA-200
Water-Reducer Admixture
STAR PLAST SA-200 is water reducing admixture with a unique formulation. This special formulation designed specifically for the use with hydraulic binders STAR PLAST SA-200 has a strong dispersant action with the finer elements of concrete. This formulation enables STAR PLAST SA-200 to enhance the concrete workability and its mechanical strength properties. STAR PLAST SA-200 does not contain calcium chloride or any other intentionally added chlorides and will not initiate or contribute to corrosion on steel reinforcement present in the concrete.
- Optimizes cement utilization.
- Substantial improvement in workability without increase of w/c ratio.
- Minimizes segregation and bleeding problems by improving cohesion.
- Improved durability.
- Lower pumping pressure
Downloads:
STAR PLAST SA-200 is water reducing admixture with a unique formulation. This special formulation designed specifically for the use with hydraulic binders STAR PLAST SA-200 has a strong dispersant action with the finer elements of concrete. This formulation enables STAR PLAST SA-200 to enhance the concrete workability and its mechanical strength properties. STAR PLAST SA-200 does not contain calcium chloride or any other intentionally added chlorides and will not initiate or contribute to corrosion on steel reinforcement present in the concrete.
STAR PLAST SA-200 is recommended as an effective Super plasticizer for promoting high quality concrete properties, Such as:
- Walls, columns and slender components packed reinforcement.
- Beams and ceilings.
- Floor slabs and foundations.
- Bridges and cantilever structures.
- Optimizes cement utilization.
- High density and impermeable concrete through very high-water reduction.
- Substantial improvement in workability without increase of w/c ratio.
- Minimizes segregation and bleeding problems by improving cohesion.
- Improved durability.
- Improves shrinkage and creep behaviors.
- Lower pumping pressure
STAR PLAST SA-200 meets the requirements for ASTM C-494 Types A
The recommended dosage of STAR PLAST SA-200 is 0.5 to 2 KG per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica. Representative trials should be conducted to determine the optimum dosage of STAR PLAST SA-200 to meet the performance requirements by using the materials and conditions in actual use
1000 lt. flow bins Bulk.
12 months minimum from production date if stored properly in original unopened packaging.
You might also be interested in:
STAR PLAST SF-300
Ultra High Range Water-Reducer Admixture
STAR PLAST SC-240
Accelerating Admixture
STAR PLAST SB-220
Slows Cement Hydration Admixture
